It is very annoying when we find striped printing results and images or writing become dotted. There are several factors that cause this to happen, here are the causes and ways of handling for striped printers. Here we are using the Canon Printer IP 2770 series.
The following causes and how to solve the printed dotted line on Canon IP:
1. Ink flow is not smooth
This could be caused by a leak or deadlock in the IV system. With no smooth flow of ink, the automatic discharge of ink from the cartridge nozzle is also disrupted so that the print results are streaked. Suggestion: use an additional part in the form of an infusion damper so that the ink flow becomes stable and smooth
2. Clogged cartridge head.
Clogged cartridge head can be caused by the printer is rarely used so that the ink clots or maybe the ink head is dirty due to dust. You can use a cartridge suction device, by: applying air pressure to the modified cartridge or injecting air into the cartridge right in the hole above the modified cartridge (pump with a refill injection device)
3. Sensor tape is dirty.
This usually happens when cleaning the cartridge, the location of the cartridge sensor tape is between the cartridge and the cartridge head looks like plastic / mica. Usually when the sensor is dirty it will affect the display / print results that are not good. The solution: clean it using dry tissue, clean all parts.
4. Head Catridge Obsolete
The characteristic is, if the end of the head is attached with a tissue, all the ink colors come out normally, but if it is used for printing, the print results are striped. This indicates that the cartridge head is weak.
A temporary solution is to change the print settings to High or Photo quality. But my suggestion is that the cartridge must be replaced immediately, so that the damage does not spread to the board
That's How to Overcome the Canon IP Printer Striped Print Results
No comments:
Post a Comment