The Wind Enters the Printer Infusion, How to Solve it?

The Wind Enters the Printer Infusion, How to Solve it? - Most people nowadays use Canon or Epson brand ink printers, although there are also people who use other brands of printers such as HP or Lexmark. Not infrequently when buying a new printer people modify it by adding ink infusions, so that to refill the ink you don't need to bother anymore. Infusion technology on the printer makes it easy to refill ink. because we no longer need to buy a new cartridge when it runs out of ink or bother injecting a printer cartridge which makes dirty hands and faces.

Not infrequently when the old printer is not used, suddenly the wind gets into the infusion tube which causes the ink not to come out properly. And sometimes there is a problem, namely the presence of air bubbles in the infusion tube, so the ink can't get into the cartridge, and eventually the color doesn't come out.

How to Solve it?

There are 3 tips that I offer to solve this problem, including:

1. Take it to a repairman, pay and be sure to be right again.

then what if you don't have money?

2. Disassemble the cartridge, disassemble the hose, keep injecting the ink until it is full and the wind is gone. This method is likely 50:50, if it doesn't work, then it's a complete failure, aka the infusion system can't be used anymore. In the end, back again to number 1.

3. The third tip, and the safest (almost without risk and cost) is the deep head cleaning method.

The ways are as follows:

1. Place the printer in its original position or at normal time / before the damage (usually the printer is higher than the IV, or the printer is parallel to the IV).

2. turn on the printer, connect it to a computer / laptop, then right click on the printer and select Printing Preferences then select Maintenance then there is an option for Deep Cleaning.

3. Select the Deep Cleaning option for about 10 to 20 times until the bubbles on the IV are gone. or it could be more than 20 times, just this third step is repeated until the bubbles disappear. because during Deep Cleaning the printer will automatically suck the ink from the infusion so that the bubbles can come out.

4. and finally, the printer can be used to print again as before.

Risks of Using Deep Cleaning

1.Ink is wasteful because at the time of Deep Clean the ink will be drained, so at least half a bottle. quite economical than having to be taken to a service place.

2. The printer is a little messy, just remember to wipe a little with a tissue when the ink is loose.

I hope the tips are useful.