Printers Help and Repair

Showing posts with label error. Show all posts
Showing posts with label error. Show all posts

Wednesday, November 20, 2019

How To fix Error number 0xc18a0301 on HP printers

How To fix Error number 0xc18a0301 on HP printers

Do the below steps on the front panel of the All-in-One printer:

A. - Press and Hold the “Print Photos” and “Red Eye Removal” buttons. Release both buttons. Display should say “Enter Special Key Combo”
B. - Press and release in sequence “Red Eye Removal”, “Print Photos”, “Red Eye Removal”
Display says "enter special key combo"
Press and release in sequence “Red Eye Removal”, “Print Photos”, “Red Eye Removal” .


If "support COxxFN0723BR" appears with "uiaux" message, perform the below steps:
2. Press and release the right arrow button until the display says “System Configuration Menu”. (on C8100 use Touch Screen)
3. Press and release the “OK” button.
4. Display should say “Hardware failure status”. If not there already, Arrow Key over to “Hardware failure status.
5. Press and release the “OK” button
6. Display should say “Hardware failure status: Clear. Press OK to clear”.
7. Press and release the “OK” Button. Message changes to “Hardware failure status Cleared. Press Cancel to continue”.
8. Press and release the “CANCEL” button as many times as necessary, so that, either the “Welcome to Photosmart Express” screen appears, or, the “Ink System Failure” screen appears. PLEASE DO NOT TRY TO PRINT AT THIS STAGE.
9. Using the Power Button, turn the unit OFF and unplug the power cable from back of the printer and wall outlet.
10. Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first and then into the back of the printer
11. Turn the unit on. The printer may display message “USE POWER BUTTON TO SHUTDOWN THE PRINTER” followed by “PRESS OK TO CONTINUE”. Press OK.
12. If the printer has already initialized, then go to the next step. If not, the printer will start the “ONE TIME INK INITIALIZATION PROCESS”. Allow this process to complete and do not interrupt. Once the initialization process is complete, the printer will print out a Diagnostic Page.
13. To verify printer functionality print a SELF TEST PAGE.


Thursday, November 14, 2019

no image

Solution Canon Pixma IP4300 Error 6A00

Some friends and also some of the tricks-collections.com’s visitors asking how to solve the problem error 6A00 in Canon Pixma IP4300. I do not have a program resetter for Canon Pixma IP4300 printer but luckily I found a manual method to solve the error. I get the method from fix your own printer forum.
The Solution Canon Pixma IP4300 Error 6A00, this reset tips is from someone (nick the use who posted in the forum is someone) in printer forum but the tutorial in picture.  You can follow the instruction in the picture to solve error 6A00 in the Canon iP4300. Some users say on the forum this reset method also work on Canon iP4200 and Canon MP800. Look the picture below to view the complete tutorial how to solve Error 6A00
041009-0222-solutioncan1.png
The reset method Error 6A00 in Canon Pixma IP4300
  1. Open the printer cover
  2. Near of the cartridge parking position, there is a little white this (look at the picture above)
  3. Free it and move it back again. Done
Some use this problem solving is work to reset Error 6A00 in Canon Pixma IP4300. For more info software resetter for all printer types, you must also visit the download page above: Download Software Resetter

Friday, October 18, 2019

no image

Brother MFC Printer Unable to Clean Error 46

This Reset Procedure is for Brother MFC Series Printer
Problem:
Brother MFC Printer display "unable to clean" or Error 46
Solution:

Friday, March 1, 2019

no image

Canon Error 5200

Canon printers are one of my favorite print devices. I have been using them in my office since a long time and they work great for me. Before a couple of month I purchased Canon PIXMA IP2770 to print photos (By the way, I have a 12MP Canon ELPH 310 HS camera). It worked according to my expectations and I was quite satisfied with it while it suddenly started to show “Error 5200”.

I restarted the printer and it gone but came again while sending a new print job. After consulting a canon technician and searching a lot of websites I understood that the 5200 error is the print head exceeds temperature error condition. It means that one or more ink cartridges gone empty and printing was continued resulting in printhead burning. Luckily a lot of canon ink cartridges come with new printhead so it should not be a big problem. Unplug both cartridges and replace them with a new one. Hope it will fix the problem.

Sunday, February 24, 2019

no image

HP Laserjet Error Codes 13 21 DOOR OPEN JAM

1. Check the transfer roller a

nd small media belt to ensure they are operating and can feed print media.
2. Check the paper path for obstructions at the transfer roller, toner cartridge, paper feed assembly, and fuser.
3. Replace any defective sensors or flags.
4. Turn the media stack over and/ or rotate it by 180° in the input tray.

Wednesday, February 20, 2019

no image

HP Laserjet Error Codes 13 2 PAPER JAM OPEN INPUT TRAYS

1. Check the input area for obstructions such as paper in the path. Also check to see if the registration assembly is damaged or if the transfer roller is out of place. 2. Replace any defective sensors or flags.
3. Ensure the media does not exceed the maximum length.
4. If multiple sheets are feeding, it might be necessary to fan the media and reduce the stack height. Also, replace separation pad.
5. Verify that the fuser is properly installed.

Sunday, February 17, 2019

no image

An introduction to Canon Error Codes

Like other brands, Canon copiers and printers are equipped with a mechanism to check the condition of the machine. It runs a check as needed, and will indicate an error in the control panel upon detention.

If an error is detected, the machine may be reset by turning it off and then on; however, this does not apply to E000, E001, E002, E003, E004, E005, E013, E020 or E717, preventing the user from casually resetting the machine when the fault is serious e.g., melting of the thermistor; otherwise, the fixing heater would overheat or toner would flow out of the hopper. If fault is identified as E000 through E003, the power switch will automatically go off in some models in 30 seconds if it is turned on. In the case of E004, power switch will go off in about 3 seconds. An authorized technician should reset E000, E002, E003, E004, E005, E013, E020 or E717. The table that follow indicate the nature and timing of detection of each error.

E000 to E399               Codes relating to the copier
E400 to E499               Codes relating to the feeder
E500 to E514               Codes relating to the finisher
E530 to E595               Codes relating to the finisher
E5F0 to E5f9               Codes relating to the saddle stitcher
E601 to E830               Codes relating to the copier

Saturday, February 16, 2019

no image

Error 1102 on Kyocera Copystar

Kyocera/Copystar manual describes that error 1102 means that “The login user name is incorrect or the domain name has not been entered. Enter login user name, domain and password correctly. But world is not so simple. Windows Vista/Windows 7 users who are on a domain must enter there complete user name in this format: (domainnameusername). Make sure that the user has write access to the folder being shared (See How to setup SMB).

If everything is fine, check if the firewall is blocking communication between the machine and PC by temporarily turning off the firewall.

Friday, February 8, 2019

no image

Lexmark Printers error Codes

Lexmark is another popular printer brand in the market. Just like with HP printers, you may encounter some error codes while printing with these brands.

The number 22 indicates paper out or paper jam and the number 30 for an open printer cover. Additionally, you may also have problems with the following errors :

1. 24 or Invalid Manual Feed. This means that you should not feed paper in the manual feed area if the printer does not request you to do so.
2. 31 or Change Paper. You have to check whether the size of the paper you installed is the same as that requested by the software or not. Correct this printer error by installing the right paper size.