Printers Help and Repair

Showing posts with label waste. Show all posts
Showing posts with label waste. Show all posts

Monday, November 11, 2019

no image

Reset Waste Ink Counter Epson Stylus Photo RX640 Using Software Resetter

Software can be used to reset Epson Stylus Photo RX640 there is two. You can use adjutment program for Epson Stylus Photo RX640 or using SSC service utility, because sscserve v 4.30 support this printer.
Resetting Using Adjustment Program Epson Stylus Photo RX640
Important, before run adjustment program for Epson Stylus Photo RX640, aler date setting in the pc to 23 januari 2007. Date setting is needed to run adjustment program for Epson Stylus Photo RX640 without error.

  • Download and run adjutment program for Epson Stylus Photo RX640 by clicking AdjProg.exe and then Select particular adjustment mode.

  • Select usb port where printer Epson Stylus Photo RX640 installed

  • Select waste ink pad counter then click Ok
  • Click initialization button and the Epson Stylus Photo RX640 should be reset
Resetting Using SSC Service Utility
  • Download and install SSCServe.
  • Run SSC Service Utility and change the seting to rx640 and then close the windows setting.
  • Right click SSC Service Utility icon in the systay to view the menu.
  • Select protection counter and then select reset protection counter to reset the counter become zero.
Note : after resetting the printer turn off the printer and turn on again.

Monday, March 18, 2019

no image

Epson Stylus Pro 4000 Waste Ink Counter Reset

     While Powering up the printer, hold down the the left arrow, down arrow, and Up arrow buttons
    You will get a “Self Testing” message.
    Use the Up Arrow button to select the “Clear Counters” menu.
    Press the right arrow button (the Menu button).
    Scroll through with the up/down arrows to select “Maint Tank”
    Select with the right arrow and execute with the right arrow
    Turn your printer off then turn it back on.

Friday, March 1, 2019

no image

How to Reset Canon i255 and i320 Waste Ink Counter

Reset Methode for Canon Printers i255, i320

Step 1 : Manual for service mode
  1. Unplug power and USB.
  2. Open door and hold power button.
  3. Connect power.
  4. Close door, then release power button.
or try other step for manual service mode
  1. Turn off the printer. And disconnect the printer cable.
  2. Press and hold the POWER button, turn on the printer.
  3. The indicator LED should be green.
  4. Press and release the RESUME button , the indicator LED should be orange.
  5. Press and release the RESUME button again, the indicator LED should be green.
  6. Release both buttons.

Step 2 : Software for Permanent
  1. Reconnect the printer cable.
  2. Download and Run General Tools software resetter for Canon printers i320, i255 then
  3. Select USB PORT
  4. Choose SET DESTINATION 1 And it should be reset.
Remark “After service mode use software for permanent reset”

Thursday, February 28, 2019

no image

How to Reset Printer Canon MP360 Waste Ink Tank Full

Reset procedure for Canon MP360 MultiPASS printer. The following procedure is copied from fixyourownprinter forum . Some user tried the procedure to reset waste ink tanf full on Canon MP 360 and reset error #343 Canon MP360 MultiPASS printer and mentioned it works.

Short Review For Canon MultiPASS MP360

The Canon MultiPASS MP360 Desktop Photo Printer Copier and Scanner delivers exceptional performance and versatility to the home office. Print high-quality text and photos quickly copy documents and graphics and easily scan photos and other images – all with one compact machine.

By using high-intensity color inks and pigment-based black ink the MultiPASS MP360 can increase your satisfaction with printing and copying output. It even delivers borderless copies and photos. borderless prints perfect for framing or the scrapbook. Both scanning and copying quality are improved with the use of CCD color scanning technology and a maximum software enhanced resolution of 9600 dpi with 48-bit color depth. Print speed the Canon MultiPASS MP360 up to 18 ppm in black up to 12 ppm in color

Manual Reset Procedure To reset waste ink tank error and reset error code #343

Manual Reset procedure Waste Ink Tank for Canon MP390 and Canon MP360 Just Follow this step how to reset waste ink tank full :
  1. Start with printer on, press aadditional functions, Scan, Copy, Scan. Now you should be in service mode.
  2. Select Test mode which is like the last available selection
  3. Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or – button until it says 8-3 then hit the select button
  • The menu will now say EEPROM Clear
  • Select Ink count which is option (0) and press set
  • Then press Stop/Reset Followed by the power button and then wait for it to restart.

Sunday, February 24, 2019

no image

Canon MPC190 Reset Waste Ink

Canon MPC190 ResetWaste Ink 1) Enter SERVICE MODE.
By pressing Menu, Copy, Scan,Copy,Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returningto the state of 3)), and then press the [ON/OFF]key.

Monday, February 18, 2019

no image

Canon i80 Waste Ink Tank Full

Try this to reset the error.

1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

5) Press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

6) Power off then back on and test.

Monday, February 11, 2019

no image

Canon i320 i255 Waste Ink Counter Reset

Canon i320, i255 Waste Ink Counter Reset.
Step 1 : Manual for service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.or
Step 1: Manual for service mode
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

Step 2 : Softwarefor Permanent
1. Reconnect the printer cable.
2. OpenGeneral Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
Remark"After service mode Pls use software for permanent reset"

Friday, February 8, 2019

Reset Waste Ink Canon i320 and i255

Reset Waste Ink Canon i320 and i255

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjGFA9m2C_oT9ZcBA4JXlv2hD6QGvepPHe5jtaYGR80GCvOOsnQB0XMDBGHNNzrZRcsDprnOJyeYNZmqH91WNQZwKpT_m6aaDdb6E9OoKHipLGPKT_-xGYtBD6DSuwsdtcgGUrla_2AAP4/s320/Canon+i320.jpgStep 1
Manual Temporary

1. Unplug power and USBOpen door and hold power buttonConnect power
2. Close door, then release power button.

or Step

1. Turn off the printer. And disconnect the printer cable
2. Press and hold the POWER button, turn on the printer
3. The indicator (L.E.D.) should be green
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green
6. Release both buttons.

Step 2 Software for Permanant

1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3. Choose (SET DESTINATION 1) And it should be reset.

Remark “After service mode Pls use software